13518219792
nagios的安装不再赘述，直接在nagios服务端进行安装pnp4nagios软件
安装展示图形页面pnpnagios（rrdtool工具用来存储数据并画图，pnpnagios用来展示图形数据）
参考：http://docs.pnp4nagios.org/pnp-0.6/install
http://docs.pnp4nagios.org/pnp-0.6
tar xf pnp4nagios-0.6.25.tar.gz
cd pnp4nagios-0.6.25
yum install rrdtool rrdtool-perl -y
./configure
编译报错:
checking for Perl Module Time::HiRes... no
configure: error: Perl Module Time::HiRes not available
解决办法：
yum -y install perl-Time-HiRes
再次编译
./configure
make all
make install
make install-webconf
make install-config
make install-init
make fullinstall
安装后出现如下输出：
*** Configuration summary for pnp4nagios-0.6.25 03-01-2015 ***
General Options:
------------------------- -------------------
Nagios user/group: nagios nagios
Install directory: /usr/local/pnp4nagios
HTML Dir: /usr/local/pnp4nagios/share
Config Dir: /usr/local/pnp4nagios/etc
Location of rrdtool binary: /usr/bin/rrdtool Version 1.3.8
RRDs Perl Modules: FOUND (Version 1.3008)
RRD Files stored in: /usr/local/pnp4nagios/var/perfdata
process_perfdata.pl Logfile: /usr/local/pnp4nagios/var/perfdata.log
Perfdata files (NPCD) stored in: /usr/local/pnp4nagios/var/spool
Web Interface Options:
------------------------- -------------------
HTML URL: http://localhost/pnp4nagios
Apache Config File: /etc/httpd/conf.d/pnp4nagios.conf
Review the options above for accuracy. If they look okay,
type 'make all' to compile.
由于nagios采用的是4.1.1，pnp4nagios采用的是0.6.25
在官方文档有好几种配置pnp4nagios的模式，但是采用sync的模式会一直收集不到数据，而报错，于是改用了Bulk Mode with NPCD，成功出图，这里分析配置过程：
参考：http://www.aboutmonitoring.com/installing-nagios-core-4-pnp4nagios-check_mk-nagvis-centos-7-redhat-7/
1、编辑nagios.cfg文件，修改
process_performance_data=0将这个值改为1
##### Values: 1 = process performance data, 0 = do not process performance data
enable_environment_macros=1
2、然后去掉下面两个注释，使之启用：
#host_perfdata_command=process-host-perfdata
#service_perfdata_command=process-service-perfdata
然后在nagios.cfg配置文件中加入以下：
# service performance data
#
service_perfdata_file=/usr/local/pnp4nagios/var/service-perfdata
service_perfdata_file_template=DATATYPE::SERVICEPERFDATA\tTIMET::$TIMET$\tHOSTNAME::$HOSTNAME$\tSERVICEDESC::$SERVICEDESC$\tSERVICEPERFDATA::$SERVICEPERFDATA$\tSERVICECHECKCOMMAND::$SERVICECHECKCOMMAND$\tHOSTSTATE::$HOSTSTATE$\tHOSTSTATETYPE::$HOSTSTATETYPE$\tSERVICESTATE::$SERVICESTATE$\tSERVICESTATETYPE::$SERVICESTATETYPE$
service_perfdata_file_mode=a
service_perfdata_file_processing_interval=15
service_perfdata_file_processing_command=process-service-perfdata-file
#
# host performance data starting with Nagios 3.0
#
host_perfdata_file=/usr/local/pnp4nagios/var/host-perfdata
host_perfdata_file_template=DATATYPE::HOSTPERFDATA\tTIMET::$TIMET$\tHOSTNAME::$HOSTNAME$\tHOSTPERFDATA::$HOSTPERFDATA$\tHOSTCHECKCOMMAND::$HOSTCHECKCOMMAND$\tHOSTSTATE::$HOSTSTATE$\tHOSTSTATETYPE::$HOSTSTATETYPE$
host_perfdata_file_mode=a
host_perfdata_file_processing_interval=15
host_perfdata_file_processing_command=process-host-perfdata-file
各个文件的使用可以查看官方说明
3、修改commands.cfg
define command{
command_name process-service-perfdata-file
command_line /bin/mv /usr/local/pnp4nagios/var/service-perfdata /usr/local/pnp4nagios/var/spool/service-perfdata.$TIMET$
}
define command{
command_name process-host-perfdata-file
command_line /bin/mv /usr/local/pnp4nagios/var/host-perfdata /usr/local/pnp4nagios/var/spool/host-perfdata.$TIMET$
}
然后开启npcd服务：
/usr/local/pnp4nagios/bin/npcd -d -f /usr/local/pnp4nagios/etc/npcd.cfg
4、
[root@RS1 libexec]# /etc/init.d/nagios checkconfig
Running configuration check...
OK.
[root@RS1 libexec]# service httpd restart
停止 httpd： [确定]
正在启动 httpd：
[root@RS1 libexec]# /etc/init.d/nagios reload
Running configuration check...
Reloading nagios configuration...
done
5、浏览器访问
http://192.168.1.155/pnp4nagios/
出现报错：PHP GD extensionPHP GD extension not available
解决：
yum -y install php-gd
[root@RS1 libexec]# /etc/init.d/nagios checkconfig
Running configuration check...
OK.
[root@RS1 libexec]# service httpd restart
停止 httpd： [确定]
正在启动 httpd：
[root@RS1 libexec]# /etc/init.d/nagios reload
Running configuration check...
Reloading nagios configuration...
done
再看观察浏览器报错：
Your environment passed all requirements. Remove or rename the /usr/local/pnp4nagios/share/install.php file now.
解决办法：
mv /usr/local/pnp4nagios/share/install.php /usr/local/pnp4nagios/share/install.php.ignore
以上只是解决了收集数据的功能，还必须在每一个host、service上展示相应的图形
设置如下：
编辑templates.cfg模板文件，创建host和service支持pnp4nagios功能：
define host {
name host-pnp
action_url /pnp4nagios/index.php/graph?host=$HOSTNAME$&srv=_HOST_
register 0
}
define service {
name srv-pnp
action_url /pnp4nagios/index.php/graph?host=$HOSTNAME$&srv=$SERVICEDESC$
register 0
}
定义完成之后，最后只需在定义的hosts、services配置文件中加入下操作：
define host{
use linux-server,host-pnp ; Name of host templates to use
; This host definition will inherit all variables that are defined
; in (or inherited by) the linux-server host template definition.
host_name localhost
alias localhost
address 127.0.0.1
}
define service{
use local-service,srv-pnp ; Name of service template to use
host_name localhost
service_description PING
check_command check_ping!100.0,20%!500.0,60%
}
于是整个配置工作完成，访问浏览器出图如下
至此结合图形展示成功
新建菜鸟学习交流群：584498750
另外有需要云服务器可以了解下创新互联scvps.cn，海内外云服务器15元起步，三天无理由+7*72小时售后在线，公司持有idc许可证，提供“云服务器、裸金属服务器、高防服务器、香港服务器、美国服务器、虚拟主机、免备案服务器”等云主机租用服务以及企业上云的综合解决方案，具有“安全稳定、简单易用、服务可用性高、性价比高”等特点与优势，专为企业上云打造定制，能够满足用户丰富、多元化的应用场景需求。
